Tag Archive | Patriotic

Valentine’s Day Clothespin Wreath

closeupI’ve really had a blast making these cute clothespin wreaths. It’s an easy-to-follow “recipe”, allows for tons of creativity, and is a really inexpensive craft. In case you missed them, I also have a patriotic 4th of July version and a Christmas version if you want to check those crafts out. Even in the dead of winter, my 4th of July wreath is one of my most popular blogs posts and a lot of readers write in to request other ideas so I thought I’d share my latest version, just in time for Valentine’s Day.

indoor

What you’ll need:

  • 12″ Wire Wreath. These are sold in the florist section of any craft store or most Walmarts for around $3. You can also buy them on Amazon.
  • 75 Clothespins (you’ll use 69 but I spray up 75 to have extra to choose the best from). I found Walmart was the cheapest at $1.98 for a pack of 100.
  • Pink, white, and red spray paint. I went with Krylon Indoor/Outdoor since I wanted something to hang outside. I also went with high gloss but you can do whichever you like. My colors were Cherry Red, White, and Oxford Blue, all in Krylon Satin. They cost about $3.50 a can at Walmart. You’ll have a ton left over so keep that in mind for future projects or if you want to make extra for gifts.
  • Valentine’s Day decorations. This is where your creativity can really come out. I picked up some cute sparkly heart stickers from Michael’s that came in sparkly pink, red, and white. The pink didn’t quite work so I just used the white and red but you can really go nuts on the decoration. Walmart, Target, and even Dollar Tree each carry cute Valentine’s items that would be great to use. You can also opt to not add anything to the painted clothespins.
  • Hot glue gun & hot glue
  • Ribbon to hang the wreath
  • Premade bow or buy ribbon to make your own. Pick whatever bow or ribbon to make a bow that you like. I fell in love with this sparkly heart ribbon and made my own bow but Michael’s also has lots of adorable pre-made bows if you don’t want to go to the trouble.

Directions:

Spraying time! I suggest working outside and laying down some cardboard so you can chuck your items on it and spray to your heart’s content. Your wire wreath will be green so spray both sides with your Krylon white spray paint so the green doesn’t peek through.

Wire wreath

 

 

 

 

 

white wreath

Spray Paint Clothespins: You’ll need 23 red, 23 white, and 23 pink clothespins. FYI, not every wire wreath and clothespin measurement is identical so the total number needed might be off so I always spray 25 of each so I have a few extra. If you have a gap or the count was off a bit you can always hide it with the bow. 🙂

Krylon paints

plain clothespins

The clothespins come pre-clipped to a piece of cardboard so I left them attached and sprayed the uglier of the two sides first, let dry, gave it another quick coat, let dry again, then sprayed the prettier side with 3-4 coats, drying in between. The drying time is short so it’s really not that time consuming and when you have your assembly line of red, white, and pink clothespins side-by-side it’s pretty quick and easy. Be sure you spray at various angles to get the sides and crevices nice and coated. And avoid spraying paint into your open mouth like I did. Let everything dry completely before assembling.

red clothespins

clothespins

pink clothespins

Assembly Time: Now that your clothespins and wire wreath are ready, it’s time to put it all together. You’ll notice that your wreath is basically four rings. You’ll be attached to the center two rings which I’ll call #2 and #3 from top to bottom.

wreath with numbers

Pick a starting point (See above picture and start top and center and move to the right of the wire divider.) and pick one color to start with. If you look at the four rings from top down, clip your first clothespin to the 2nd ring.

first clothespins

first clothespins

With your second clothespin, clip it to the 3rd ring.

2nd ring

With the third, you’ll clip to the 2nd ring again and keep on alternating all the way around the wreath.

three clothespins

wreath

Add Ribbon: Cut a 17″ piece of ribbon and glue or tie around the back wire part of the wreath.

Hot Glue Time: It’s time for gluing! Work from the back and glue any loose clothespins to the back wire part of the wreath or in between the clothespins themselves, just to secure them on to the wire wreath.

Add Decorations: Glue your various Valentine’s Day decorations to the top, bottom, and middle parts of the clothespins. You can also leave decorations off completely or go nuts like I did.

Helpful Tip: See those nasty glue gun cobwebs? A very quick and easy way to get rid of them is to blow dry them away. Take your hair dryer and apply heat to any offending cobweb and it will shrink back up, essentially disappearing. Just be careful not to apply too much heat or it could remelt the glue you want to stay stuck. :)

Attach Bow: Finish by gluing or tying on your bow to the bottom of the wreath.

All finished! Just hang indoors or outdoors and you’re ready for Valentine’s Day! I hope you enjoy and if you end up making this wreath and want to share a picture, feel free to send me a private message with a picture or email me at missbutterbean(at)gmail.com. Happy Valentine’s Day and lots of love!

front door

4th of July Clothespin Wreath

Update: I was honored to have my blog and 4th of July clothespin wreath craft featured in American Profile’s Community Table Magazine, Parade Magazine, and Real Simple. At the request of readers, I have also created a Christmas version with instructions here and a Valentine’s Day version with instructions here.

4th-of-July-wreath

With 4th of July just around the corner, it’s time to start decorating with some red, white, and blue! I saw a similar patriotic clothespin wreath and thought, Hey, I can do that! so hit up Michael’s and Walmart to pick up my supplies and whipped up a few.

 

For those DIY’ers, here’s what you’ll need to make your very own 4th of July Clothespin Door Hanger. Since I’m a visual learner, I took lots of snaps of each step to help you along the way.

What you’ll need:

  • 12″ Wire Wreath. These are sold in the florist section of any craft store for less than $3.
  • 70 Clothespins (give or take one or two). I found Walmart was the cheapest at $1.98 for a pack of 100.
  • Red, white, and blue spray paint. I went with Krylon Indoor/Outdoor since I wanted something to hang outside. I also went with country colors instead of traditional but you can do whichever you like. My colors were Burgundy, Ivory, and Oxford Blue, all in Krylon Satin. They cost about $3.50 a can at Walmart. You’ll have a ton left over so keep that in mind for future projects.
  • Star Punch. A 1/4″ star works great so I bought an $8 Fiskers hand punch.
  • Ivory/Cream textured card stock. When I bought my wreath at Michael’s, I swung by the scrapbooking section and picked up a piece of cardstock that was textured to make the stars pop a bit more.
  • Gel Super Glue
  • Hot glue gun & hot glue
  • Ribbon to hang the wreath.

Directions:

Spray stuff! I suggest working outside and laying down some cardboard so you can chuck your items on it and spray to your heart’s content. Your wire wreath will be green so spray both sides with your Krylon Ivory spray paint so the green doesn’t peek through.

Wire Wreath: Before

Wire Wreath: Before

Wire Wreath: After

Wire Wreath: After

Spray Paint Clothespins: You’ll need 25 red, 25 white, and 20 blue clothespins. Since not every wire wreath and clothespin is identical, the total number needed might be off by one or two clothespins so I suggest making two extra blue just in case. The clothespins come pre-clipped to a piece of cardboard so I left them attached and sprayed the uglier of the two sides first, let dry, gave it another quick coat, let dry again, then sprayed the prettier side with 3-4 coats, drying in between. The drying time is short so it’s really not that time consuming and when you have your assembly line of red, white, and blue clothespins it’s pretty quick and easy. Be sure you spray at various angles to get the sides and crevices nice and coated.

Krylon Paints

Burgundy Clothespins

Ivory Clothespins

Oxford Blue Clothespins

Punch Stars: Using your Fiskers start punch, punch out 100 stars out of your cardstock (5 stars for each of the 20 blue clothespins).

Fiskers

Textured Paper

Using the gel super glue, glue your stars onto your blue clothespins. I did 5 per clothespin, alternating each one.

I really like Loctite ’cause it’s a gel and less messy and it has comfort squeeze sides on it.

Star Blue Clothespins

Assembly Time: Now that your clothespins are ready, it’s time to put it all together. You’ll notice that your wreath is basically four rings. You’ll be attached to the center two rings which I’ll call #2 and #3 from top to bottom.

Painted wreath

Pick a starting point (See above picture and start top and center and move to the right of the wire divider.) and pick either red or white to start with. If you start with red then you’ll end up with white or visa-versa so it doesn’t really matter. If you look at the four rings from top down, clip your first clothespin to the 2nd ring.

Start

2nd Ring

With your second clothespin, clip it to the 3rd ring.

2nd clothespin

Second clothespin

With the third, you’ll clip to the 2nd ring again and keep on alternating until you have 5 white clothespins clipped.

2nd clothespin

White section

Now it’s time to swap colors. Keep alternating rings and colors until you’ve clipped all 25 red and white clothespins. Finish by clipping the starred blue clothespins for the last section.

Finished wreath

Add Ribbon: Cut a 17″ piece of ribbon and glue or tie around the back wire part of the wreath.

Ribbon Glued

Hot Glue Time: It’s time for gluing! Work from the back and glue any loose clothespins to the back wire part of the wreath or in between the clothespins themselves, just to secure them on to the wire wreath.

Glue

Helpful Tip: See those nasty glue gun cobwebs? A very quick and easy way to get rid of them is to blue dry them away. Take your hair dryer and apply heat to any offending cobweb and it will shrink back up, essentially disappearing. Just be careful not to apply too much heat or it could remelt the glue you want to stay stuck. 🙂

Hairdryer

All finished! Just hang indoors or outdoors and you’re ready for the 4th of July!

4th-of-July-wreath

4th of July Poke Cake

Final Cake

With 4th of July just around the corner, I thought it would be fun to take a spin on the traditional poke cake and make it a little more patriotic. Poke cake’s are very easy and great for hot summer days. They involve baking a cake from a box, poking holes all over the cake, pouring jell-o all over the cake, and chilling it in the fridge for a few hours. You can use pretty much any kind of cake mix and jell-o flavor so it’s easy to mix it up and have fun with it. The result is so yummy and since the cake is nice and chilly it is so refreshing after a long day in the heat.

NOTE: This cake is super simple but does take several hours for the jell-o to chill so plan to make in the morning or a day ahead of time.

Ingredients:

  • 1 white cake mix (And ingredients to prepare the boxed cake, which is typically egg whites, vegetable oil, and water)
  • 1 pint blueberries
  • 1 small box strawberry jell-o
  • 1 cup boiling water
  • 1/2 cup cold water
  • 1 8 oz. tub Cool Whip
  • 1 16 ounce container strawberries

Directions: 

1. Prepare cake mix according to the directions and pour batter into pan. Sprinkle with blueberries, reserving a handful for the “stars” in the the flag. Bake cake according to directions on box.

Blueberry Batter

2.  After cake has cooled for 15 minutes, take the end of a round spatula and poke holes all over the cake. (I don’t suggest using a fork. That’s what I did the first time and the jello didn’t spread evenly).

Poked Cake

3. In a small bowl, mix jell-o with hot water. Add cold water and stir. Pour all over cake. Chill for 3 hours.

Jello on cake

4. Set aside several strawberries for your flag (about 1 cup). In a food processor or blender,   purée remaining strawberries. Spread evenly over the cake.

Strawberry over cake

5. Slice remaining strawberries thinly. Frost cake with Cool Whip and using remaining blueberries and strawberry slices, decorate cake as an American flag, using blueberries for the “stars” and strawberry slices as the “stripes”.

Final Cake

Happy 4th of July!

Final Slice